جديدة العربات نصف المقطورة شاحنة نقل الحاويات Reis Treyler Telescopic

axles make: SAF
tires: 385 65R 22,5
new tires
20ft
30ft
40ft
45ft
hiCube
warranty
service book
CONTAINER CARRIER SEMI-TRAILER TECHNICAL SPECIFICATION
Tractor Type
4x2 tractor suitable for 1100mm King Pin Height. (Total GWA 44 tons)
Chassis
High Graded Material “I” profile it is produced with gas welding
it has high-quality strength
Standard chassis Type. (Required changes will be made after the order confirmation)
Special reinforced bracket on the square beam profile at the front and rear
Rear cross twist lock cross member will be 110 mm from the center to the edge of rear bumper
Rear Bumper and light and license plate holder will be moved to the inner side with 100 mm
Upper level of the chassis will not exceed 1150 mm with 385 65 R 22,5 tires
Over All Lenght Dimension
Length 9 700 mm x Width 2550 mm x Height 1250 mm
Wheelbase (between king pin and center of axles) +/- 7550 mm
Vehicle Type
Skeleton chassis
Container twist lock —12 PCS. 1 x 20 feet
2 x 20 feet
1 x 30 feet
feet 1 x 40 feet and 1x 45 feet
30 ft. cross member portable place is not needed to reinforce the neck of the chassis
King Pin
2" kingpin and second king pin position. Jost or OMS brand
Pin detachable from below made by SAE standards 8 bolt type
Axles —3 x 09.000 kg carrying capacity SAF brand Disc Brake Type
First axle with lifting mechanism
controlled manually on the chassis
Distance Between Axles
1320 mm
Brakes & Suspension
(2S/2M RSS)
Automatic Slack Adjuster
3 units of 80 lt
40 lt and one spare air tubes
Landing gear
Double Speed
24000 kg carrying capacity SAF
Mechanical Landing Gears
Rear Bumper
Suitable 70/221 / AT-version of the rear bumper
Tire Chock
Carriers with 2-unit wheel chock
Tires and Rimes
6 PCS 385/ 65 R 22,5 Single tire type
Bridgestone brand
120 offset 22,5 x 11,75 Rim
280,8 x 335 x 10 wheel stud M 22 x 1,5
Mud Cover
6 Units full plastic mudguards fited with galvanized steel holders
Spear Wheel Carrier
N/A or Optional
N/A or Optional
Document holder
Water Tank
N/A or Optional
Paint
Steel Material surface is cleaned by grit metal and send
which is shot blasted on the surfaces of the metal
2 Floor Epoxy primers are made and final paint with standard RAL 7024 or demand of the customer
Galvanization is optional
Electrical System and Lightening
System
3 unit’s amber-colored lights placed on both sides
Park lamps at the rear side of the vehicle
License plate lamps
Reflector triangles
Flameproof electrical system
2 X 7-pin and 1 x 15-pin electrical socket. (The connection pins will be mounted on special designed front panel)
Electrical system is ASPÖCK brand Euro point 2 or Euro point 3